WHAT IS THE PURPOSE OF USING DC CONNECTOR IN MICRONTECH KILEWS CONTROLLER?

WHAT IS THE PURPOSE OF USING DC CONNECTOR IN MICRONTECH KILEWS CONTROLLER?

Now Industry 4.0, assembling line integration is becoming a must. So for this KILEWS provide an Electric screwdriver and transducerized tool with a smart controller (as shown below KL-TCG & SKP-BC40-HLN), these controllers come with batch count and output tightening status, together with error-proof functions. These are also able to prevent errors from the double hit, tightening the number of screws, and tightening time. With various I/O, the controller can be connected to your PLC and integrated with your automation equipment. Smart Counter controller is Compatible with PLC-based process control system and accurate counting on screw fastening. Auto leaning function built-in could judge the best setting value. And also this counter is able to set running speed & timing by the Slow-Start function.

Kilews SKP-BC40-HLN
Kilews KL-TCG Controller

Purpose of using DC connector –

 KILEWS controller provide 24VDC output for operating the small electronics component witch integrate with I/O of the controller like proximity sensors for clamping and de-clamping and also for external start and also to connect the tower lamp with controller for showing the OK, NG, and OK-ALL status of tightening. So to connect these equipment and also to integrate with PLC, a DC connector is used in Microntech KILEWS controller.

 

Microntech Engineers are the premier supplier for Kilews assembly tools in India. Microntech has offices across India and has global assembly solutions. You can contact Microntech by emailing at sales@microntechgroup.com or visiting their website at www.microntechgroup.com.     




Location: Noida, Uttar Pradesh, India

Comments

Post a Comment

Popular posts from this blog

Microntech Kilews Brushless tools slow start function and benefits

Image
 Microntech Kilews Brushless tools slow start function and benefits The main purpose of an electric screwdriver is tightening of application. Currently, the electric screwdriver is performing well by its performance in various electronic as well as mechanical industries. Kilews electric screwdriver is very popular in terms of accuracy. Kilews screwdriver is not different from a conventional manual screwdriver, both serve the same purpose of tightening of application.  But instead of manual operation, the electric screwdriver is having an electric motor to tighten the application very easily. These electric screwdriver work on the principle of the clutch mechanism, in which clutch is used to adjust the torque of the tool. Electric screwdriver are two types based on the source of power supply i.e. AC type electric screwdriver and DC type electric screwdriver. Dc type screwdriver is a brushless motor screwdriver where Kilews also introduced the counter display controller which...
Read more

MICRONTECH KILEWS LI-ION BATTERIES

Image
  MICRONTECH KILEWS LI-ION BATTERIES Microntech KILEWS cordless tools are available with a High-performance brushless motor and lithium-ion battery for industrial purpose. . KILEWS Li-ion batteries are high-performance Li-ion batteries, with built-in protection function to prevent overcharge and over-discharge. Battery ID identification, which only allows the original charge station to recharge the battery to secure battery safety and extend battery lifetime. Low voltage protection and over-temperature protection available in these batteries. Li-ion batteries –   Lithium  is that the  lightest of all metals has  the best  electrochemical potential and provides  the most important  energy density for weight. The energy density of lithium-ion  is usually  twice that of  the quality  nickel-cadmium. There is potential for higher energy densities. The load characteristics are reasonably good and behave similarly to nickel-cadmium...
Read more

WHAT ALL CAN WE SEE IN DIPLAY SCREEN OF MICRONTECH KILEWS KL-TCG CONTROLLER?

Image
  WHAT ALL CAN WE SEE IN DISPLAY SCREEN OF MICRONTECH KILEWS KL-TCG CONTROLLER?  Kilews latest invention KL-TCG controller with transducerized tool is able to display tightening torque, output tightening torque, output tightening status, storage tightening torque, and together with error-proof functions. This is also able to prevent errors from tightening torque, tightening the number of threads, and tightening time. With various I/O, KL-TCG can be connected to your PLC and integrated with your automation equipment and output assembly status instantly to your server or private could by Ethernet or WIFI for traceability . KILEWS tools are available with push, Lever, or external start operation in the torque display system. All status and display screen in KL-TCG- 1.        OK signal LED - this green LED is glowing when tightening done OK. 2.        NG signal LED- this red LED is glowing when any NG coming during...
Read more